DSC LE4010-AT AT&T LTE Cellular Wireless Alarm Communicator AS-IS For Parts

Description

Up for sale today we have a
DSC LE4010-AT AT&T LTE Cellular Wireless Alarm Communicator
.
It is being sold AS-IS for parts or repair.
The capacitor has broken off of the main board. Please see pictures for best idea of condition.
Returns are NOT accepted for this item.
The DSC LE4010-AT is a universal wireless cellular AT&T LTE alarm communicator that is compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats. The LE4010-AT connects the alarm control panel to the cellular AT&T LTE network and reports alarm signals directly to the GeoArm monitoring station receiver (Sur-Gard System I-IP/II/III/IV/5). The LE4000 uses the cellular network to ensure low-cost, high-speed and reliable alarm communications.
The LE4010-AT is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the cellular AT&T LTE network to send an alarm signal to the GeoArm central monitoring station. In a primary role, the communicator simply sends the alarm transmission over the cellular network immediately. Alarm signals are transmitted directly to the IP linecard of the GeoArm monitoring station receiver without the need of clearinghouse involvement saving valuable time and eliminating a potential point of failure.
Activating and initializing the LE4010-AT can be done using the mobile interface or web-user interface provided by C24 Communications. No special tools are required. The LE4010-AT can be configured to conveniently accept SMS commands from select phone numbers to trigger remote activation of the PGM outputs. Outputs can be used to remotely arm/disarm your alarm system or trigger other actions such as opening a garage door.
The LE4010-AT can intelligently monitor the panel transmission and switch over to the cellular AT&T LTE network when the phone line is down. This function will occur for both traditional POTS and newer digital technologies (i.e. VoIP).
Product Features:
Uses LTE cellular network for high-speed, reliable and low-cost communications to an IP receiver
Automatically switches to 3G (HSPA/HSPA+) if LTE service is not available
Dual-band UMTS/HSPA; Penta-Band LTE; Quad-Band GSM/EDGE radio
Bi-color wireless signal strength indicator
Compatible with 4-digit or 10-digit Contact ID communication format as described in SIA DC-05 Standard and SIA DC-03 Standard for 300 baud.
Compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats
Full event reporting
4 on-board inputs with NC, NO or SEOL supervision
4 on-board outputs (open collector)
Activation and initialization via webuser or mobile interface provided by C24 Communications
PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts (up to four phone numbers)
Simulates landline
12V 1.2 Ah battery (optional, not included)
Case Tamper Output
Landline overvoltage protection
DLS support for status, firmware updates and remote debug enable
Remote Firmware Upgrade
Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
View communicator status directly from your mobile phone to support on-site or remote troubleshooting
SMS command & control for panel arm/disarm
PTM call routing to direct cellular signals to multiple receivers based on dialed number
Advanced carrier selection to secure a suitable cellular connection
Two unique trouble display models
Easy enrollment with C24 Communications via web or mobile interface
Shipping for this item will be FREE for USPS Mail with tracking number.
Powered by SixBit's eCommerce Solution